Asphalt shingle roofing calculator
Squares, shingle bundles, underlayment, ice and water shield, drip edge, starter, ridge cap, nails and vents for an asphalt shingle roof, with optional tear-off.
Your job
10% for a simple gable; 15% or more for hips, valleys and dormers.
Eave protection reaches 900 mm up the roof and at least 300 mm inside the wall line.
Answer
- Shingles
- 56 bundles (18.4 squares ordered, 16.8 squares of roof)
- Roof surface
- 1,677 sq ft at 6/12 (factor 1.118)
- Underlayment
- 2 rolls of 10 squares
- Ice and water shield
- 2 rolls of 2 squares
- Drip edge and starter
- 15 pieces of 10 ft, 2 bundles of starter
- Ridge cap
- 2 bundles
- Nails and vents
- 0.8 boxes, 12 roof vents
- Attic ventilation estimate: 720 sq in of net free vent area using a 1/300 estimating ratio; confirm the required ventilation ratio against the building code adopted in the project jurisdiction and split ventilation appropriately between low and high openings.
Method: Roof area = footprint x sqrt(1 + (rise/12)²); 1 square = 100 sq ft; 3 bundles per square; Confirm roofing, eave-protection and roof-space-ventilation requirements against the building code adopted in the project jurisdiction; Nails about 320 per square; drip edge, starter and cap quantities from the edge lengths entered
Estimating aid based on a summary of the CEC. Provinces adopt different editions and amendments. Confirm with the authority having jurisdiction, and the engineer of record where one is involved.
Priced takeoff
- Architectural asphalt shingles, bundle$2,598.9656 bundle at $46.4128 h
- Synthetic roof underlayment, 10 square roll$189.882 roll at $94.943 h
- Ice and water shield, 2 square roll$222.202 roll at $111.102 h
- Drip edge, 10 ft$166.5015 ea at $11.101.5 h
- Starter strip shingles, bundle$124.942 bundle at $62.470.8 h
- Hip and ridge cap shingles, bundle$124.242 bundle at $62.121.2 h
- Roofing coil nails, box$43.421 box at $43.42
- Roof vent$201.1212 ea at $16.766 h
- Materials
- $3,671.26
- Labour, 42.5 h at $86.00
- $3,655.00
- Your cost, before markup and tax
- $7,326.26
Reference prices are dated baselines (2026-11) for Ontario. Confirm them with your supplier. In TradeQuote PRO your own saved prices replace these.
How it works
You enter 11 inputs. The calculator returns the quantities, rounds them up the way the material is sold, and lists the takeoff so it can be priced.
- Area entered as.
- Area (sq ft).
- Roof pitch (rise per 12 in run).
- Waste allowance (%). 10% for a simple gable; 15% or more for hips, valleys and dormers.
- Eave length (ft).
- Rake length (ft).
- Ridge and hip length (ft).
- Ice and water shield width at the eaves (ft). Eave protection reaches 900 mm up the roof and at least 300 mm inside the wall line.
- Net free vent area per roof vent (sq in).
- Tear off existing roofing.
- Layers to tear off.
The method
- Roof area = footprint x sqrt(1 + (rise/12)²); 1 square = 100 sq ft; 3 bundles per square
- Confirm roofing, eave-protection and roof-space-ventilation requirements against the building code adopted in the project jurisdiction
- Nails about 320 per square; drip edge, starter and cap quantities from the edge lengths entered
Check results against the code and manufacturer data that apply to your job. Prices are dated baselines to confirm with a supplier.
Add this to a real estimate in TradeQuote PRO
The takeoff lands as estimate lines with your prices, markup and tax, then becomes a proposal the client signs.