Insulation calculator

Batts or blown insulation for a target R-value, with the continuous insulation needed when the cavity falls short, and the vapour barrier.

Your job

Imperial R-value; RSI = R / 5.678. Check NBC 9.36 or your province for the minimum in your climate zone.

Answer

Insulation
R-24 batts
Achieved
R-24 (RSI 4.23) against R-24
Area
1,000 sq ft
Continuous insulation added
none
Vapour barrier
1,100 sq ft

Method: Confirm insulation, energy-efficiency and vapour-control requirements against the building code and energy requirements adopted in the project jurisdiction; RSI = R / 5.678; batt R-values per the catalog (R-12 to R-31); extruded polystyrene about R-5 per inch; Blown attic insulation priced per sq ft at R-50; other depths are scaled by R-value

Estimating aid based on a summary of the CEC. Provinces adopt different editions and amendments. Confirm with the authority having jurisdiction, and the engineer of record where one is involved.

Priced takeoff

  • Insulation batts R-24$1,110.001000 sqft at $1.1112 h
  • 6 mil polyethylene vapour barrier$99.001100 sqft at $0.098.8 h
Materials
$1,209.00
Labour, 20.8 h at $104.00
$2,163.20
Your cost, before markup and tax
$3,372.20

Reference prices are dated baselines (2026-11) for Ontario. Confirm them with your supplier. In TradeQuote PRO your own saved prices replace these.

How it works

You enter 5 inputs. The calculator returns the quantities, rounds them up the way the material is sold, and lists the takeoff so it can be priced.

  • Area to insulate (sq ft).
  • Assembly.
  • Target R-value (R). Imperial R-value; RSI = R / 5.678. Check NBC 9.36 or your province for the minimum in your climate zone.
  • Insulation.
  • Vapour barrier (6 mil polyethylene). On the warm side of the insulation, with 10% for laps.

The method

  • Confirm insulation, energy-efficiency and vapour-control requirements against the building code and energy requirements adopted in the project jurisdiction
  • RSI = R / 5.678; batt R-values per the catalog (R-12 to R-31); extruded polystyrene about R-5 per inch
  • Blown attic insulation priced per sq ft at R-50; other depths are scaled by R-value

Check results against the code and manufacturer data that apply to your job. Prices are dated baselines to confirm with a supplier.

Add this to a real estimate in TradeQuote PRO

The takeoff lands as estimate lines with your prices, markup and tax, then becomes a proposal the client signs.

Start free trial