Drywall calculator
Sheets, joint compound, tape, screws and corner bead for walls and ceilings, with openings, layers and level of finish, plus labour.
Your job
Add up the lengths of all walls to be boarded.
Only subtract openings larger than about 16 sq ft each; small ones are not worth the cut waste.
4 x 12 ft sheets mean fewer butt joints in long rooms.
Answer
- Sheets
- 45 of 4 x 8 ft 1/2 in regular
- Board area
- 1,300 sq ft (900 walls, 400 ceiling, 1 layer)
- Joint compound
- 3 pails of 17 L
- Tape
- 2 rolls of 250 ft
- Screws
- 2 boxes of 1,000
- Corner bead
- 6 pieces of 8 ft
- Labour estimate
- 52 hours
Method: Area method: (wall length x height - openings + ceiling) x layers, plus waste, divided by the sheet area; Joint compound by level of finish (GA-214 / ASTM C840 levels 1 to 5); about 1.1 screws per sq ft per layer; tape 0.37 ft per sq ft; Labour per sq ft of 0.012 hang and 0.006 to 0.04 finish by level are estimating assumptions
Estimating aid based on a summary of the CEC. Provinces adopt different editions and amendments. Confirm with the authority having jurisdiction, and the engineer of record where one is involved.
Priced takeoff
- Drywall 1/2 in, 4 x 8$863.1045 sheet at $19.1811.25 h
- All-purpose joint compound, 17 L pail$113.043 pail at $37.689 h
- Paper drywall tape, 250 ft roll$11.442 roll at $5.720.5 h
- Drywall screws, box$50.462 box at $25.23
- Metal corner bead, 8 ft$31.866 ea at $5.310.72 h
- Hang drywall (labour only)price pending1300 sqft15.6 h
- Tape and finish, Level 4: tape and three coats (flat paint) (labour only)price pending1300 sqft36.4 h
- Materials
- $1,069.90
- Labour, 73.47 h at $104.00
- $7,640.88
- Your cost, before markup and tax
- $8,710.78
Reference prices are dated baselines (2026-11) for Ontario. Confirm them with your supplier. In TradeQuote PRO your own saved prices replace these.
How it works
You enter 11 inputs. The calculator returns the quantities, rounds them up the way the material is sold, and lists the takeoff so it can be priced.
- Total wall length (ft). Add up the lengths of all walls to be boarded.
- Wall height (ft).
- Ceiling area (sq ft).
- Doors and windows to subtract (sq ft). Only subtract openings larger than about 16 sq ft each; small ones are not worth the cut waste.
- Board.
- Sheet size. 4 x 12 ft sheets mean fewer butt joints in long rooms.
- Layers.
- Finish.
- Outside corners.
- Waste allowance (%).
- Include hanging and finishing labour. Turn off if your catalog prices already carry the labour.
The method
- Area method: (wall length x height - openings + ceiling) x layers, plus waste, divided by the sheet area
- Joint compound by level of finish (GA-214 / ASTM C840 levels 1 to 5); about 1.1 screws per sq ft per layer; tape 0.37 ft per sq ft
- Labour per sq ft of 0.012 hang and 0.006 to 0.04 finish by level are estimating assumptions
Check results against the code and manufacturer data that apply to your job. Prices are dated baselines to confirm with a supplier.
Add this to a real estimate in TradeQuote PRO
The takeoff lands as estimate lines with your prices, markup and tax, then becomes a proposal the client signs.